The wireless dimmer module (HADimmer2) is mains powered (220VAC, 50hz) and is capable of dimming up to 6 channels. More than one light can be connected to each channel if this is desired. The entire module is designed to be built inside a wall and covered with a blank faceplate to hide it from sight.

The module continuously waits for commands, it has no buttons so it will only operate when it is instructed wirelessly to perform an action.

For more information on how this dimmer is meant to be used in a complete system, please look at our Home Automation page.

Normal Version

• This is the normal version of the dimmer, it does not have any of the extra features of the master version
• This dimmer will respond only to wireless commands addressed to it. For example, by a computer or a master dimmer.

Technical Details

• 6 Channels
• Each channel can drive up to 400W
• Total power should not exceed 1000W
• Fuses for every channel
• Dimmer module has a range of 30meters indoors (however, multiple dimmers in a house will relay messages to each other thus further extending the range)
• Remotely/Wirelessly update firmware!